1. Processing citrus fruits differs a lot from processing other kinds of fruits, as citrus fruits have peels and seeds, if we direct mill the citrus and extract juice from the mash, the citrus peels and seeds in the juice will influence the end product’s taste. Due to this feature, we designed a citrus extractor that is especially for citrus fruits, and the extractor can separate the peels, seeds, pulp and juice.
2. The citrus fruits go through extractors, juice and pulp as the main products to make into drinkable juice, whereas citrus peels and seeds as the by-products can be dewatered via belt press extractor and the final products can be as animals feed.
3. Before citrus juice extraction, we use the citrus oil extractor to grind citrus oil from citrus peel. Depending on the variety of citrus, 0.5-2% oil will be existed in the citrus oil wash water, through three-phase disk stack centrifuge separator concentration and purification, the pure essential citrus oil is recovered.
4. The citrus processing line offers turnkey solutions for clients including citrus juice production, citrus oil recovery, citrus peel and seeds deep processing, With this method, fruit juice producers can considerably enhance the resource utilization and cost-effectiveness of the entire system.
5. The capacity of the citrus processing line ranges from 10 tons per day to 500 tons per day, the end product that can be produced is NFC citrus juice, frozen orange concentrated juice, aseptic orange concentrated juice, citrus pulp, citrus oil and citrus peel animal feed.
6. All the citrus processing equipment is CIP capable and made of food-grade SUS304 material, this hygienic advantage ensures the production of optimum products.
7. The production process of a citrus processing plant typically involves fruit selection and grading, washing, sorting, juice extraction, juice and pulp refining,  juice separating and clarification, concentrating and pasteurization/sterilizing, filling, and packaging.

— Frozen Concentrated Orange Juice(FCOJ) filled into bulk bags (5kg, 220kg and 1000kg).

—Aseptic Concentrated Orange Juice filled into aseptic bags(220L and 1000L).

—Not From concentrated(NFC) orange juice filled into bottles, cartons and pouches.

—Blended orange juice filled into bottles, cartons or bags.

—Citrus oil: it is a byproduct in the citrus juice processing line. The citrus oil is extracted from citrus peel and citrus pulp and then recovered by centrifuge separating machines. Refined citrus oil can be used for flavor or aroma in the food industry and skin care industries.

—Citrus pulp: The citrus pulp is separated and recovered from citrus juice by the scrape refiner and cyclone separator, then the citrus pulp can be pasteurized, filled into containers, and stored in the freezer as the ingredients for RTD juice pulp processing plants; It can also be dried to reduce moisture content and increase shelf life by belt drying.

Aseptic/Frozen Concentrated Orange Juice(FCOJ) uses fresh oranges as raw materials, fresh oranges after washing, sorting, sizing, juice extracting, scraping refining, disk separating, and evaporating, the frozen concentrated juice will be pasteurized or without pasteurization, and then filled into composite bags, the end products will be stored in cold temperature -18℃; The aseptic concentrated juice will be sterilized and filled into aseptic bags, and the end products will be stored in room temperature. This processing line can be suitable for orange, lemon, lime or kinnow and other citrus fruit processing. The end product soluble solid is 65-70brix.

NFC orange juice is 100% natural juice without any other ingredients, it is purely natural and can keep the nutrition and flavor in fresh fruits. which also uses fresh citrus as raw materials, after washing, sorting, juice extracting, and separating to get fresh orange juice, then homogenizing and degassing and UHT sterilizing then filling an aseptic brick carton, the whole filling process is aseptic, and the end products can have 12 months shelf life in aseptic processing. The other type is orange juice pasteurizing/UHT sterilizing, then cold filling into gable-top cartons or bottles, this type of juice producing, storage, transporting, and sales distribution process all in 4℃ cold environment. and the shelf life ranges from 14 days to 120 days.

Blended orange juice: The blended orange juice use concentrated orange juice or fresh orange as raw materials, then blend with water, sugar and other ingredients, after homogenizing, degassing sterilizing, then filled into small packages like PET or glass bottles, pouches.

Fresh ripen citrus after harvesting from the farm, using the truck to transport it to the orange processing site, then unloading the citrus into the orange receiving pool, through water flume, deliver citrus to air blow washing machine and brush washing machine to remove the dirty matters from fresh fruits. Then use a roller sorting machine to choose the bad fruits from the good fruits.

The citrus oil extracting machine is specially designed for grinding and extracting oil from citrus peel. The machine is made of SUS304 material and with a high oil yield rate, the capacity for the citrus oil extractor is from 2-10 tons available. When extracting the oil from the citrus peels, same amount of water needs to be added into the machine to wash off the oil on the citrus peel.

There are two types of juice extractors for citrus fruits:

The first is a squeezer-type citrus juice extractor(also called whole fruit cup extractor) is specially designed for citrus juice extracting, the orange extractor has three to five channels,  which can sort the citrus according to different size, then through the channel to feed citrus into the extractor cups, it can separate the juice, oil, peel and seeds, and the capacity can reach to 500 citruses per hour. The juice extractor is suitable for oranges, mandarins, tangerines, key limes, persian limes and lemons juice extracting.

The second extractor is roller half cutting juice extractor, this extractor is composed of two rollers and one sharp knife between two rollers, when the fresh citrus feeding into the hopper, the knife will cut the citrus fruits into half and then send them to two rollers, With the rotation of the pressure roller, the gap between the pressure roller and the stainless steel screen becomes smaller and smaller. Under the action of the squeezing force, the citrus juice is obtained.  The roller half extractor is suitable for extracting limes, lemons, and oranges which side is under φ50-60mm. Use this extractor can not separate the oil and seeds, but the processing capacity is bigger than the cup extractors.

The citrus oil recovery system process includes citrus oil extracting, citrus oil refining,  two-stage centrifuge separating and essential oil de-waxing.

Citrus oil extracting: the citrus oil extraction process can be done by a needle-type extractor to obtain the oil, when extracting the oil, pure water needs to be added to wash off the oil on the citrus peels. The oil can also be extracted by cup-type citrus extractors.

Citrus oil refining: the refining process can use a screw finisher or scrape finisher to remove the big particles in oil emulsion.

First stage centrifuge separating:  it is mainly used to remove most of the water and insoluble solids from the citrus oil emulsion. This stage may involve more than one desludging centrifuge, depending upon the volume being processed. The oil-rich emulsion (cream) produced by this centrifuge should have an oil ranging between 65% to 85% (and preferably >75% for best results). This oil-rich cream becomes the feedstock for the second stage polishing centrifuge.

Second stage polishing centrifuge: it is where the remaining water and some cloudy particles are removed. The oil discharged from this stage is the fine essential oil that can be ready for storage.

Essential citrus oil de-waxing: the citrus oil contains a small amount of wax, the wax will precipitate out of the oil when stored at cold temperature, so we will need one more de waxing process to remove the wax in citrus oil. Firstly chill the citrus oil to -18℃, then use the double filter to remove the wax in the oil.

Essential citrus oil storage: the oil can be stored in an unrefrigerated warehouse that is below 20℃.

We use a scrape refiner/finisher to obtain pure citrus juice. Using the principle of combining crushing and rapid centrifugation, the juice and pulp/pomace can be quickly separated, and the pit can be effectively removed. As the machine works in a fully enclosed state, it can effectively reduce the oxidation of the citrus juice.

Citrus/Orange juice after scrape finisher separation, the pulp content is about 8%-12% in the juice, if you want to make lower pulp content orange juice, then the two-phase stack centrifuge separator with 4000-8000rpm rotate speed can be used for the application. After centrifuge separation, the pulp in orange juice can be reduced to 1%-3%.

The product obtained from a process in which water is removed from orange juice by utilizing heat under vacuum conditions. The orange concentrate is normally concentrated to 65°Brix which has the soluble solids content of 7 equal volumes of orange juice at 11.8°Brix.

The orange juice flows from one stage to the next without recycling. And cool down in a very short time. The evaporator can also be equipped with an aroma recovery system where the aromas are extracted from the juice. Before leaving the evaporator, the concentrated juice passes through a flash cooler which drops the temperature to 10 ℃.

Citrus juice treatment uses a tubular-type pasteurizer. A heat treatment that kills some but not all of the microorganisms present in juice to minimize microbial growth in subsequent handling and storage. A temperature of 70°C for one minute is required to sufficiently reduce the microbial load in orange juice. Pectinesterase inactivation requires minimal heat treatment at 90°C for 10 seconds.

There are two pasteurization processes in the citrus juice processing line. Primary pasteurization should be performed after juice extraction to deactivate PME as soon as possible. It is pasteurized above 95–98 °C for 10–30 sec. The secondary pasteurization(sterilization) is carried out before NFC or concentrated juice packaging, and involves NFC after bulk storage or juice reconstituted from concentrate. It is for microbial destruction rather than the inactivation of enzymes. Since microorganisms are less heat resistant than enzymes, the second pasteurization will be carried out at a lower temperature than the first pasteurization.

According to different end products, different filling machines are adopted.

For NFC citrus juice, it is usually filled into gable top cartons, PET or glass bottles, the filling temperature is 5-7℃ and the shelf life is about 15 days-3 months;

For aseptic concentrated orange juice, an aseptic bag filler will be used, the filling temperature will be 25-30℃, and the shelf life is 12 months;

For frozen concentrated juice, after we get the juice, can be pasteurized or without pasteurization, then filed into bulk bags with 200-1000L, and then end product shelf life can be reached to 12-24 months in -18℃ warehouse.